FILLING MACHINES FOR FOOD & BEVERAGE PRODUCERS
OUR FILLERS
2-Head Manual Filler
A Low cost manual 2-head Gravity filler.
Very simple to use and well suited to startup or boutique producers who are currently filling by hand, and need to get more consistency and accuracy in every fill.
-
Our entry level manual 2-head gravity filler. The filler is height adjustable, so different bottle sizes can be accommodated, and you'll get a consistent fill each and every time.
All components are food grade and with a stainless steel hopper tank and frame, to ensure it's easy to clean.
-
Non-foaming and non-viscous liquid products such as:
>Plant-based milks
>Fruit / vegetable juices or tonics
>Distilled spirits / liquors
>Water and other non-carbonated beverages
-
Glass bottles
Minimum bottleneck opening size: 16mm
-
>Filling volumes from 250ml to 5L
>Stainless steel construction
>Easy to disassemble for cleaning
>Safe to use in wet areas
>Approx fill rate: 8 bottles per minute*
>Minimum bottleneck opening size: 16mm
>Dimensions: 0.5m wide x 0.6m depth x 0.9m high
>Suitable for benchtop use
*depending on set fill level and operator efficiency.
4-Head Step Filler
A Low cost Semi-automatic 4-head filler.
The Pneumatic-Assisted lift system makes this filler Simple to use, and Ideal for boutique producers who need to increase filling capacity to meet demand.
-
Our 4-head semi-automatic step filler is gravity filled, with a hopper tank above the filling heads. Set the fill level and you'll get a consistent fill each and every time. The fill level is adjustable, so different bottle sizes can be accommodated.
All components are food grade and with a stainless steel hopper tank and frame, to ensure it's easy to clean.
-
Non-viscous liquids products such as:
>Milk
>Plant-based milks
>Fruit / vegetable juices or tonics
>Distilled spirits / liquors
>Water and other non-carbonated beverages
-
Plastic bottles - can be modified for glass with different filling nozzles
Minimum bottleneck opening size: 19mm
-
>Filling volumes from 250ml to 5L
>Hopper tank capacity 125L
>Stainless steel construction
>Easy to disassemble for cleaning
>Safe to use in wet areas
>Approx fill rate: 20 bottles per minute*
>Minimum bottleneck opening size: 19mm
>Dimensions: 1.2m width x 0.7m depth x 2.2 high
*Depending on bottle volume and operator efficiency.
NB: Hand capping required. Site interface required for product supply and CIP.
-
>CIP spray ball and return manifold
>CIP return pump
>Conveyoring
>8-head option available
>Bottle Rinser
Unit shown with bottle rinser addon